TM 10-3930-669-34 (25) Coat thrust washer  (10)  with  clean  transmission oil. (26) Install thrust washer (10) on input shaft (11). NOTE Perform   Steps   (27)   and   (28)   only   if bearing was removed in disassembly. (27) Coat bearing (9) with clean transmission oil. (28) Install bearing (9) in converter housing (3). (29) Coat   bushing   (8),   preformed   packing   (7),   and seal (6) with clean transmission oil. (30) Install  bushing  (8),  preformed  packing  (7),  and seal (6) in converter housing (3). 8-33