| |
TM 10-3930-669-34
2-5. INSPECTION AND SERVICING EQUIPMENT (CONT).
c.
Lubricate specific points shown in LO 10-3930-669-12 regardless of interval. Do not lubricate gear cases or
engine. Check processing tag for gear case and engine oil. If tag states the oil is good for 500 miles (805 km) of
operation and is of the proper grade for local climatic operation, check oil level but do not change oil.
2-6. SPECIAL SERVICE INSTRUCTIONS.
a.
Forklift Body and Panel Inspection.
(1)
Inspect body and panels for evidence of damage during shipment.
(2)
Check doors, latches, and hinges on compartments for proper operation.
(3)
Check mounting hardware and tighten as necessary.
b.
Forklift Cab Inspection.
(1)
Inspect cab for evidence of damage during shipment.
(2)
Inspect windshields and window glass for cracks or other damage.
(3)
Check door latches, hinges, and windows for proper operation.
(4)
Check seat and seat belts to ensure they are securely installed and that operator’s seat adjustment controls
are functioning properly.
c.
Engine Inspection.
(1)
Remove any seals, plugs, or tape used to seal air inlets and ports on the engine during shipping.
(2)
Check crankcase oil level with dipstick.
(3)
Examine air cleaner element for dirty or restricted condition.
(4)
Inspect engine and cooling hose connections for evidence of leakage.
(5)
Remove any obstruction of cooling air flow to cooling blower.
d.
Transmission Inspection.
(1)
Check fluid level with dipstick.
(2)
Check external hoses and tubes for evidence of leakage.
2-4
|