| |
TM 10-3930-669-34
(8)
Install
three
preformed
packings
(10)
on
solenoids (8).
(9)
Install three solenoids (8) and pins (9) in valve
body (4).
(10)
Connect three wires (7) to solenoids (8).
(11)
Connect connector P11 (5) to connector S11 (6).
(12)
Install gasket (3) and plate (2) on valve body (4)
with six screws (1). Tighten six screws 8 to 11
lb-ft (11-15 N•m).
f. Adjustment.
(1) Tighten nuts (14 and 11) in following order:
Thread adjustment rod (13) fully into spool (15).
Tighten nut (14 inner). Fully depress spool to
bottom and hand tighten nut (14 outer). Turn nut
(14 outer) an additional half turn. Tighten nut
(11).
NOTE
Follow-on Maintenance:
•
Install transmission inching valve
(TM 10-3930-669-20).
•
Install cab (TM 10-3930-669-20).
END OF TASK
8-13
|
