TM 10-3930-669-34 8-2.  TRANSMISSION VALVE BODY REPLACEMENT/REPAIR (CONT). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing.  To avoid injury or death, keep away from open fire and use in well- ventilated   area.      If   adhesive,   solvent,   or   sealing   compound   gets   on   skin   or   clothing,   wash immediately with soap and water. NOTE Apply  sealing  compound  only  to  the one screw noted in removal. (3) Apply   sealing   compound   on   threads   of   screw (16). (4) Install    nine    screws    (16)    in    valve    body    (4). Tighten screws 17 to 22 lb-ft (23-30 N•m). (5)    Position   adjustment   rod   (13)   in   inching   valve plunger (15). (6) Position two nuts (14) on adjustment rod (13). (7)    Position   two   washers   (12)   and   nut   (11)   on adjustment rod (13). 8-12