| |
TM 10-3930-669-34
(2)
Disconnect
connector
P11
(5)
from
connector S11 (6).
(3)
Disconnect three wires (7) from three
solenoids (8).
(4)
Remove three pins (9) and solenoids (8)
from valve body (4).
(5)
Remove three preformed packings (10)
from solenoids (8). Discard preformed
packings.
(6)
Remove nut (11) and two washers (12)
from adjustment rod (13).
(7)
Loosen two nuts (14) on adjustment rod
(13).
(8)
Remove adjustment rod (13) from inching
valve plunger (15).
NOTE
•
Mark hole in transmission
case
that
has
sealing
compound applied to threads
of screw to ensure correct
installation.
•
Tag and mark all screws and
valve body to ensure correct
installation.
(9)
Remove nine screws (16) from valve body
(4).
(10)
Remove six screws (17) from valve body
(4).
(11)
Remove two screws (18) from valve body
(4).
(12)
Remove valve body (4) and gasket (19)
from transmission (20). Discard gasket.
8-3
|
