TM 10-3930-669-34 7-5.  ENGINE WIRE HARNESS REPLACEMENT (CONT). (16) Disconnect harness connector (52) from voltage regulator (53). (17) Disconnect harness connector (54) from alternator connector (55). (18) Remove nut (56) and wire (57) from alternator (58). (19) Remove screw (59) and wire (60) from alternator (58). b. Installation. (1) Install wire (60) on alternator (58) with screw (59). (2) Install wire (57) on alternator (58) with nut (56). (3) Connect harness connector (54) on alternator connector (55). (4) Connect harness connector (52) on voltage regulator connector (53). (5) Connect broken belt sensor cable connector (51) on connector P15 (50).  Tighten cap nut (49). 7-50