| |
TM 10-3930-669-34
7-3.
STARTER REPAIR (CONT).
(27)
Install wire (17) on switch (18) with two
lock washers (16) and screws (15).
(28)
Install wire (14) on commutator (8) with
two lock washers (13) and screws (12).
(29)
Connect two wires (9 and 10) on magnet
(11).
(30)
Install
preformed
packing
(7)
on
commutator (8).
(31)
Install cover (5) on studs (6) with two
grommets (4), grommet covers (3), lock
washers (2), and screws (1).
(32)
Using test stand, test starter for voltage
loss. Voltage loss must not be higher than
1.6 volts.
NOTE
Follow-on Maintenance:
• Install starter (TM 10-3930-669-20)
END OF TASK
7-30
|
