| |
TM 10-3930-669-34
7-3.
STARTER REPAIR (CONT).
NOTE
Tag and mark all wires and cables
prior to removal.
(3)
Disconnect two wires (9 and 10) from
magnet (11).
(4)
Remove two screws (12), lock washers
(13), and wire (14) from commutator (8).
Discard lock washers.
(5)
Remove screw (15), lock washer (16), and
wire (17) from switch (18). Discard lock
washer.
(6)
Using soldering iron, remove two wires (19
and 20) from commutator (8).
(7)
Remove two studs (6), washers (21), and
magnet (11) from commutator (8).
(8)
Disconnect wire (22) from switch (18).
(9)
Remove screw (23), lock washer (24), and
washer (25) from rail bar (26) and switch
(18). Discard lock washer.
7-16
|
