TM 10-3930-669-34 7-2. ALTERNATOR REPAIR (CONT). (24) Install six wires (8) on five terminals (9) as tagged  and  marked  during  Disassembly, with five lock washers (7) and screws (6). (25) Install key (5) on rotor assembly shaft (4). (26) Install pulley assembly (3) on rotor assembly   shaft   (4)   with   washer   (2)   and lock nut (1). (27) Using test stand, test alternator for proper AMPS and Voltage out-put. With alternator     working     properly     the     amps should  be  LOW  to  0  and  volts  should  be 27.0 (36.0 kw) to 29.6 (39.2 kw). NOTE Follow-on Maintenance: •    Install regulator (TM 10-3930-669-20) •    Install relay (TM 10-3930-669-20) •    Install alternator (TM 10-3930-669-20) END OF TASK 7-14