| |
TM 10-3930-669-34
6-3.
BLOWER REPAIR.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c.
Assembly
INITIAL SETUP:
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic’s: Automotive
Washer, Lock
(Item 1, Appendix E)
Washer, Lock
Press, 60 Ton (Item 5, Appendix E)
Washer, Lock (2)
Materials/Parts
Equipment Condition
Rags, Wiping (Item 19, Appendix B)
Blower removed (TM 10-3930-669-20)
Solvent, Dry-cleaning (Item 20, Appendix B)
a.
Disassembly.
(1)
Remove nut (1), screw (2), and impeller (3) from
blower (4).
(2)
Remove pulley (5) from blower (4).
WARNING
Use care when removing or installing
snap and retaining rings. Snap and
retaining
rings
are
under
spring
tension and can act as projectiles
when
released
and
could
cause
severe eye injury.
(3)
Remove snap ring (6) and shaft (7) from blower
(4).
6-10
|
