| |
TM 10-3930-669-34
(6)
Remove eight nuts (15), washers (16), and
manifold (3) from engine (13).
(7)
Remove four gaskets (17) from engine (13).
Discard gaskets.
b.
Installation.
(1) Position four gaskets (17) on engine (13).
(2) Install manifold (3), eight washers (16), and nuts
(15) on engine (13).
(3) Install four extension nuts (14).
(4) Install manifold ducting (9) on engine (13) with
six screws (10), lock washers (11), and washers
(12).
(5) Install bracket (8) and connector (7) to manifold
ducting (9) with screw (4), lock washer (5), and
washer (6).
(6) Install tube (2) on manifold (3) with two clamps
(1).
NOTE
Follow-on Maintenance:
• Connect batteries (TM 10-3930-669-20).
• Close right-hand engine access cover
(TM 10-3930-669-10).
• Remove wheel chocks (TM 10-3930-
669-10).
• Install blower ducting (Para 6-2).
END OF TASK
END OF TASK
4-3
|
