| |
TM 10-3930-669-34
(2)
Install four washers (25) and plugs (24) in
crankshaft (20).
(3)
Using press, install pin (22) and gear (21) with
face bearing identification mark directed away
from crankshaft.
(4)
Install four balancing weights (19) on crankshaft
(20) with eight washers (18) and screws (17).
Preload screws to 22 lb-ft (30 N•m). Tighten
screws (Appendix D).
3-79
|
