TM 10-3930-669-34 3-13.  PISTON AND CONNECTING ROD ASSEMBLY REPLACEMENT/REPAIR (CONT). e.     Installation. (1) Install bearing half (6) in piston and connecting rod assembly (3). (2) Position piston and connecting rod assembly (3) in crankcase (5). (3) Install bearing half (4) in connecting rod bearing cap (2). (4) Install connecting rod bearing cap (2) on piston and connecting rod assembly (3) with two screws (1).  Preload screw to 22 lb-ft (30 N•m).  Tighten screws (see Appendix D) NOTE Follow-on Maintenance: • Install oil pump (Para 3-12). • Install cylinders (Para 3-7). END OF TASK 3-72