TM 10-3930-669-34 3-10. ENGINE FRONT COVER REPLACEMENT/REPAIR (CONT). (3) Install  preformed  packing  (26)  and  cover (25)  on  front  cover  (3)  with  lock  washer (24) and screw (23). (4) Install   lock   nut   (22),   adapter   (21),   and angle drive (18) in front cover (3). (5) Install body (17) on angle drive (18).Tighten body. (6) Install tach drive nut (19) and shaft (20) on body (17). (7) Install  preformed  packing  (16)  and  screw (15) in front cover (3). (8) Install filler cap (13) and spacer ring (14) in front cover (3). e. Installation. (1) Apply   sealing   compound   to   gasket   (11) and position on front cover (3). (2) Install  front  cover  (3)  on  crankcase  (12) with two washers (10) and screws (9). (3) Install     sixteen     spacers     (8),     four     lock washers (7), and screws (6) on front cover (3). (4) Install  four  lock  washers  (5)  and  screws (4). (5) Install washer (2) and screw (1). NOTE Follow-on Maintenance: • Install crankshaft pulley (Para 3-9). • Install injection pump (Para 4-5). • Install blower (TM-10-3930-669-20). • Install   alternator   bracket   (TM-   10-3930- 669-20). • Install alternator (TM-10-3930-669-20). END OF TASK 3-58