| |
TM 10-3930-669-34
3-9.
CRANKSHAFT PULLEYNIBRATION DAMPER REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit General Mechanic’s: Automotive
Engine/Transmission assembly removed
(Item 1 Appendix E)
(Para 3-3)
Wrench, Torque (0-60 N.m)
Blower belt tensioner removed
(Item 5, Appendix E)
(TM 10-3930-669-20)
Retainer (Item 13, Appendix E)
Alternator belts removed (TM 3930-669-20)
a.
Removal
NOTE
Crankshaft pulley screw has left-hand threads.
(1)
Install retainer No. 030 1107 on crankshaft pulley (1) and remove screw (2) and washer (3).
(2)
Remove crankshaft pulley (1) from front cover (4).
(3)
Remove eight screws (5), washers (6), and vibration damper (7) from crankshaft pulley (1).
b.
Installation.
(1)
Install vibration damper (7) on crankshaft pulley (1) with eight washers (6) and screws (5).
(2)
Install crankshaft pulley (1) on front cover (4) with washer (3) and screw (2). Preload screw 36.9 lb-ft (50 N-
m). Tighten screw (see Appendix D).
NOTE
Follow-on Maintenance:
•
Install engine/transmission assembly
(Para 3-3).
•
Install blower belt tensioner
(TM 10-3930-669-20).
•
Install alternator belts
(TM 3930-669-20).
END OF TASK
3-54
|
