TM 10-3930-669-24P UNIT, DIRECT/GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR: TRUCK, LIFT, FORK, CLEAN BURN DIESEL, FRONT/SIDE LOADING, 6,000 LB CAPACITY SECTION I - INTRODUCTION 1.  SCOPE This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment   required   for   performance   of   Unit,   Direct Support,    and    General    Support    Maintenance    of    the FORKLIFT.    It  authorizes  the  requisitioning,  issue,  and disposition  of  spares,  repair  parts  and  special  tools  as indicated by the source, maintenance, and recoverability (SMR) codes. 2.  GENERAL In  addition  to  Section  I,  Introduction,  this  repair  parts and   special   tools   list   is   divided   into   the   following sections: a. Section  II.    Repair  Parts  List.    A  list  of  spares and repair parts authorized by this RPSTL for use in the performance   of   maintenance.      The   list   also   includes parts  which  must  be  removed  for  replacement  of  the authorized parts.  Parts lists are composed of functional groups  in  ascending  alphanumeric  sequence,  with  the parts in each group listed in ascending figure and item number  sequence.    Bulk  materials  are  listed  in  item name sequence.  Repair parts kits are listed separately in  their  own  functional  group  within  Section  II.    Repair parts  for  repairable  special  tools  are  also  listed  in  the section.      Items   listed   are   shown   on   the   associated illustration(s)/figure(s). b. Section III.  Special Tools List.  A list of special tools,     special     TMDE,     and     other     special     support equipment  authorized  by  this  RPSTL  (as  indicated  by Basis of Issue (BOI) information in DESCRIPTION AND USABLE  ON  CODE  column)  for  the  performance  of maintenance. c. Section  IV.    National  Stock  Number  and  Part Number  Cross-Reference  Indexes.    A  list,  in  National Item    Identification    Number    (NIIN)    sequence,    of    all national stock numbered items appearing in the listing, followed  by  a  list  in  alphanumeric  sequence  of  all  part numbers   appearing   in   the   listings.      National   stock numbers and part numbers are cross-referenced to each illustration, figure and item number appearance. 3.  EXPLANATION OF COLUMNS (SECTION II AND III) a. ITEM NO.  (Column (1)).   Indicates the number used to identify items called out in the illustration. b. SMR    CODE    (Column    (2)).         The     source, maintenance,   and   recoverability   (SMR)   code   is   a   5- position code containing supply/requisitioning information, maintenance category authorization criteria, and  disposition  instructions,  as  shown  in  the  following breakout: *Complete   Repair.      Maintenance   capacity,   capability, and   authority   to   perform   all   corrective   maintenance tasks of the “Repair” function in a use/user environment in order to restore serviceability to a failed item. 1