| |
TM 10-3930-669-24P
When using this column to locate an item, ignore the
first 4 digits of the NSN. However, the complete NSN
should be used when ordering items by stock number.
(2)
FIG. Column. This column lists the
number of the Figure where the item is identified/
located. The figures are in numerical order in Section II
and Section III.
(3)
ITEM
Column.
The
item
number
identifies the item associated with the figure listed in the
adjacent FIG. column. This item is also identified by
the NSN listed on the same line.
b.
Part Number Index. Part numbers in this index
are listed by part number in ascending alphanumeric
sequence (i.e., vertical arrangement of letters and
number combination which places the first letter or digit
of each group in order A through Z, followed by the
numbers 0 through 9 and each following letter or digit in
like order).
(1)
CAGEC column. The Commercial And
Government Entity (CAGE) Code (C) is a 5 digit
alphanumeric code used to identify the manufacturer,
distributor, or Government agency, etc., that supplies
the item.
(2)
PART NUMBER column. Indicates the
part number used by the manufacturer (individual, firm,
corporation or Government activity), which controls the
design and characteristics of the item by means of its
engineering drawings, specifications standards, and
inspection requirements to identify an item or range of
items.
(3)
STOCK NUMBER Column. This column
lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and
CAGEC columns to the left.
(4)
FIG. Column. This column lists the
number of the figure where the item is identified/ located
in Section II or III.
(5)
ITEM Column. The item number is the
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
5. SPECIAL INFORMATION
Use the following subparagraphs as applicable:
a.
Usable on Code. The usable on code appears
in the lower left corner of the Description column
heading. Usable on codes are shown as "UOC..." in the
Description Column (justified left) on the first line
applicable item/nomenclature. Uncoded items are
applicable to all models. Identification of the usable
code used in this RPSTL is:
Code
Used On
JJV
Model R60SL-DC
b.
Fabrication Instructions. Bulk materials required
to manufacture items are listed in the bulk material
functional group of this RPSTL. Part numbers for bulk
materials are also referenced in the Description Column
of
the
line
item
entry
for
the
item
to
be
manufactured/fabricated.
Detailed
fabrication
instructions for items source coded to be manufactured
or fabricated are found in the applicable maintenance
level manual.
c.
Assembly Instructions. Detailed assembly
instructions for items source coded to be assembled
from component spare/repair parts are found in the
applicable maintenance level manual. Items that make
up the assembly are listed immediately following the
assembly item entry or reference is made to an
applicable figure.
d.
Kits. Line item entries for repair parts kits
appear in group 9401 in Section II.
e.
Associated Publications. The publications listed
below pertain to the TRUCK, LIFT, FORK, CLEAN
BURN DIESEL, FRONT/SIDE LOADING, 6,000 LB.
CAPACITY - MODEL R60SL-DC:
Publication
Short Title
TM 10-3930-669-10
Operator's Manual
LO 10-3930-669-12
Lubrication Order
TM 10-3930-669-24P
RPSTL
TM 10-3930-669-20
Unit Maintenance Manual
TM 10-3930-669-34
Direct and General
Support Maintenance
Manual
5
|