| |
TM 10-3930-669-20
c.
Installation.
(1)
Position cable (2) in cab (6).
(2) Install cable (2) on pin of heater temperature
control (5) with retaining clip (11).
(3) Adjust heater temperature control (5) to its left
position.
(4) Install cable (2) on heater temperature control
(5) with clamp (10), lock washer (9), screw (8),
and nut (7).
(5) Install heater temperature control (5) on cab (6)
with four screws (4).
(6)
Turn heater temperature control valve arm (12)
as far as it will go towards the right and down.
(7)
Install cable (2) in clamp (3). Tighten screw
(1).
NOTE
Follow-on Maintenance:
• Close engine access cover (TM 10-3930-669-10).
• Remove wheel chocks (TM 10-3930-669-10).
END OF TASK
16-31
|
