TM 10-3930-669-20 16-2.    FRONT WINDSHIELD WIPER ASSEMBLY REPLACEMENT/REPAIR (CONT). e. Installation. (1) Install black wire connector (18) on terminal P (19) of wiper assembly (6). (2) Install red wire connector (16) on terminal H (17) of wiper assembly (6). (3) Install green wire connector (14) on terminal L (15) of wiper assembly (6). (4) Position wiper assembly (6) on cab (13). (5) Install gasket (12) and flange (11) on wiper assembly  (6)  and  cab  (13)  with  two  screws (9) and lock washers (10). Tighten screws to 10 lb-ft (14 N.m). (6) Install  nut  (8)  and  dust  cap  (7)  on  wiper assembly (6). (7) Install  wiper  arm  (5)  on  wiper  assembly  (6) with washer (4), nut (3), lock washer (2), and nut (1). NOTE Follow-on Maintenance: • Connect batteries (Para 7-48). • Center  and  close  mast  assembly  (TM  10-3930- 669-10). • Remove wheel chocks (TM 10-3930-669-10). END OF TASK 16-6