TM  10-3930-669-20 (3)   Remove    two    screws    (9),    lock    washers    (10), flange (11), and gasket (12) from wiper assembly (6)   and   cab   (13).      Discard   lock   washers   and gasket. (4)   Remove wiper assembly (6) from cab (13). (5)   Remove green wire connector (14) from terminal L (15) of wiper assembly (6). (6)   Remove red wire connector (16) from terminal H (17) of wiper assembly (6). (7)   Remove black wire connector (18) from terminal P (19) of wiper assembly (6). (8)   Place wiper assembly (6) on work surface. b.  Disassembly. (1)   Remove  two  screws  (20)  and  shield  (21)  from motor mount (22). 16-3