| |
TM 10-3930-669-20
15-7. CAB DOOR SEAL REPLACEMENT.
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Engine OFF (TM 10-3930-669-10)
(Item 1, Appendix B)
Parking brake applied (TM 10-3930-669-10)
Brush, Cleaning (Item 2, Appendix B)
Wheels chocked (TM 10-3930-669-10)
Cab door opened (TM 10-3930-669-10)
Step plate removed (Para 15-6)
Materials /Parts
Detergent (Item 10, Appendix B)
Rag, Wiping (Item 19, Appendix C)
Solvent, Drycleaning (Item 20, Appendix C)
a.
Removal. Remove cab door seal (1) from cab (2).
b.
Cleaning/lnspection.
WARNING
·
Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use
only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors.
Keep away from heat or flame. Never smoke when using solvent; the flashpoint for type I
drycleaning solvent is 100'F (38°C) and for type II is 138°F (50°C). Failure to do so may result in
injury or death to personnel.
·
If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help.
If solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately flush
eyes with water and get immediate medical attention.
(1)
Clean metal door frame with drycleaning solvent and wipe dry.
(2)
Using a dry brush, clean inside flange of door seal.
15-30
|
