| |
TM 10-3930-669-20
15-5. CAB DOOR LATCH POST REPLACEMENT (CONT).
b.
Cleaning/Inspection.
WARNING
·
Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use
only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors.
Keep away from heat or flame. Never smoke when using solvent; the flashpoint for type I
drycleaning solvent is 100°F (38°C) and for type II is 138°F (50°C). Failure to do so may result in
injury or death to personnel.
·
If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help.
If solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately flush
eyes with water and get immediate medical attention.
(1)
Clean all parts and air dry.
(2)
Inspect parts for damaged threads, cracks, burrs, and sharp edges.
(3)
Replace all damaged parts.
c.
Installation. Install screw (3) and two washers
(4 and 5) on cab (6) with washer (2) and nut (1).
Tighten nuts to 36 lb-ft (49 N•m).
NOTE
Follow-on Maintenance:
·
Close cab door (TM 10-3930-669-10).
·
Remove wheel chocks (TM 10-3930-669-
10).
END OF TASK
15-28
|
