TM 10-3930-669-20 c.  Installation. NOTE · During  installation  keep  approximately  .25  in.    (6.4  mm)  space  between  all  parts  of  cab  assembly and forklift assembly, and ensure cab is aligned as noted during removal. · If cab was placed in service position, proceed to d: Service Installation. · If cab was removed, proceed to Step (1). (1) With the aid of an assistant, install lifting device on cab (70) and lift to gain access to mounting points under cab. WARNING Cab weighs 1,010 lbs (458 kg).  Attach suitable lifting device prior to removal or installation to prevent possible injury to personnel. NOTE Steering shaft will have to be installed on the steering pump when the cab is installed on the forklift. (2) Position mount (82), mount (80), washer (73), washer (72), and screw (71) inside cab (70). 15-13