TM 10-3930-669-20 NOTE · Steering   control   pump   will   drop   slightly   after   removal   of   mounting   hardware.      Ensure   spacers between steering control shaft and floor are retrieved for later use. · Steering shaft will be removed from the steering pump when the cab is removed from the forklift. (15) Remove four screws (31) and washers (32) from steering control shaft (33) and cab floor (34). (16) Remove four spacers (35) and steering control pump (36) from steering control shaft (33) and steering column linkage (37). (17) Remove two nuts (38) from plate (39). (18) Remove two nuts (40), screws (41), and plate (39) from bracket (42). (19) Remove clip (43), pin (44), and clevis (45) from throttle bracket (46).  Discard cotter pin. (20) Remove two nuts (47), two washers (48), clamp (49), and cable (50) from bracket (42). 15-9