TM 10-3930-669-20 NOTE Right front washers and nut should remain in position to stabilize the cab. (4) Loosen three nuts (10), washers (11), washers (12), screws (13), washers (14), washers (15), and mounts (16) on forklift (17). (5) Remove two rear nuts (10), washers (11), and washers (12) from rear mounting points (18). (6) With the aid of an assistant, lift rear of cab (6) from forklift (17) approximately 6 in.  (15.24 cm). (7) Removing two mounts (19), mounts (16), washers (15), washers (14), screws (13), and washers (20) from rear cab mounting points (18) of forklift (17) and position two rear cab mounting points on wood blocks. (8) Verify stability of wood blocks prior to removing lifting device from cab (6). 15-5