| |
TM 10-3930-669-20
14-4. SIDE SHIFT CHAIN ADJUSTMENT (CONT).
(6)
Position straight bar (4) against vertical portion of forks (5).
(7) Measure distance from face of tire rim (6) at points closest to forks (5).
NOTE
·
If measurement A is equal to 1-7/8 to 2-1/8 in. (47.625 to 53.975 mm), proceed to Step (8).
·
If measurement is not equal to 1-7/8 to 2-1/8 in. (47.625 to 53.975 mm), adjust side shift. Repeat
Steps (6) and (7).
(8)
Stop engine (TM 10-3930-669-10).
(9)
Loosen two screws (1) and nuts (2) on clevis (3).
(10)
Using wrench, turn wrench point (7) and adjust
rod (8) length until measurement A equals 1-7/8
to 2-1/8 in. (47.625 to 53.975 mm).
(11)
Tighten two nuts (2) on screws (1).
NOTE
Follow-on Maintenance:
·
Pivot mast to front (TM 10-3930-669-10).
·
Remove wheel chocks (TM 10-3930-669-10).
END OF TASK
14-10
|
