TM 10-3930-669-20 (3) Remove  two  screws  (5)  from  load  rest  (4).  and hydraulic filter head (6). (4) Remove three screws (7) load rest (4) from fork lift (8). (5) Remove two screws (9) and wear pad (10) from load rest (4). b.  Installation. (1) Install  wear  pad  (10)  on  load  rest  (4)  with  two screws (9). (2) Install  load  rest  (4)  on  fork  lift  (8)  with  three screws (7). (3) Install   two   screws   (5)   on   load   rest   (4)   and hydraulic filter head (6). (4) Install  right-hand  access  panel  (2)  on  load  rest (4) with three screws (3). (5) Install screw (1) on right-hand access panel (2). NOTE Follow-on Maintenance: · Close right-hand engine access cover (TM 10-3930-669-10). · Remove wheel chocks (TM 10-3930-669-10). END OF TASK 14-3