TM 10-3930-669-20 (2) Pack outer bearing (7) with grease. (3) Position    bearing    (7),    washer    (6),    and    hub bearing nut (4) on spindle (5). (4) Tighten hub bearing nut (4) until there is a drag in the outer bearing cone (7) as wheel is rotated in both directions. Then, back bearing nut off to the nearest slot in nut and spindle. (5) Install cotter pin (3) on hub bearing nut (4) and spindle (5). (6) Pack   grease   around   the   spindle   (5)   and   hub bearing nut (4) area. (7) Using  a  soft-face  mallet,  install  cap  (1)  on  hub (2). NOTE Follow-on Maintenance: · Install wheel (Para 12-2). · Remove wheel chocks (TM 10-3930-669-10). END OF TASK 13-17