| |
TM 10-3930-669-20
12-2. WHEEL/TIRE REPLACEMENT.
This task covers:
a. Front Wheel/Tire Replacement
b. Rear Wheel Tire Replacement
INITIAL SETUP
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Item 1, Appendix B)
Wrench, Torque (O to 175 lb-ft [0-237 N-m])
(Item 2, Appendix B)
Wrench, Torque (O to 600 lb-ft [0-813 N-ml)
(Item 2, Appendix B)
Wrench Set, Socket, 3/4 in.
(Item 2, Appendix B)
Floor Jack, Min 4 Ton Cap.
Wooden Blocks
Personnel Required
Two
Equipment Condition
Engine OFF (TM 10-3930-669-10)
Parking brake applied (TM 10-3930-669-10)
Wheels chocked (TM 10-3930-669-10)
a.
Front Wheel/Tire Replacement
(1)
Removal.
WARNING
Center lifting point of floor jack under forklift body behind front wheel. Failure to do so could
allow the jack to slip, causing injury or death to personnel or damage to equipment.
NOTE
Front wheels should only be replaced with forklift on a hard level surface.
(a)
Position floor jack under forklift (1) behind outer wheel (2) and raise forklift until weight is off outer wheel
but inner wheel (3) is still in contact with the ground.
(b)
Position wooden block under frame of forklift (1).
(c)
Loosen eight nuts (4). Do not remove.
(d)
Using floor jack, raise forklift (1) until inner wheel (3) is off the ground.
12-2
|
