TM 10-3930-669-20 (2) With the aid of an assistant, pump brake pedal (2) until brake pressure is felt. (3) Loosen bleed nipple (1) until brake pedal (2) goes completely down. (4) While assistant holds brake pedal (2) completely down, tighten bleed nipple (1). NOTE Check fluid level and fill as necessary. (5) Repeat steps (2) through (4) until fluid coming from hose is free of air. (6) Remove hose from bleed nipple (1). NOTE Follow-on Maintenance: · Close mast (TM 10-3930-669-10). · Remove wheel chocks (TM 10-3930-669-10). END OF TASK 11-31/(11-32 Blank)