TM 10-3930-669-20 11-8.  BRAKE SYSTEM BLEEDING. This task covers: Bleeding INITIAL SETUP Tools and Special Tools Tool Kit, General Mechanic's: Automotive (Item 1, Appendix B) Shop Equipment, Automotive Maint and Repair: Common No.  1 (Item 2, Appendix B) Materials/Parts Brake Fluid (Item 8, Appendix C) Rags, Wiping (Item 19, Appendix C) Hose, 1/4 in.  ID Personnel Required Two Equipment Condition Engine OFF (TM 10-3930-669-10) Parking brake applied (TM 10-3930-669-10) Wheels chocked (TM 10-3930-669-10) Mast pivoted out 90°  (TM 10-3930-669-10) Bleeding NOTE · Both left and right wheel brakes are bled the same way.  Right side shown. · Master cylinder must be filled with brake fluid. · Place suitable container with a 1 qt.  (1.0 liter) capacity under drive axle to catch spilling fluid. (1) Install 1/4 inch hose on bleed nipple (1). 11-30