| |
TM 10-3930-669-20
NOTE
Pad adjuster lever should be in
horizontal
position
when
pads
contact disk.
(12)
Install brake (8) with nut (9) on brake
caliper (10).
(13)
Position parking brake cable (3) in forklift
bracket (4).
(14)
Install parking brake cable (3) on brake
lever (8) with pin (7), washer (6), and
retaining pin (5).
(15)
Hand tighten upper nut (2) to remove
slack in cable (3).
(16)
Tighten lower nut (1).
NOTE
Follow-on Maintenance:
·
Install return spring assembly on oil pump bracket (Para 10-3).
·
Verify parking brake adjustment (Para 11-3).
·
Install drive shaft (Para 9-2).
·
Install cab floor plate (Para 15-12).
·
Apply parking brake (TM 10-3930-669-10).
·
Close cab door (TM 10-3930-669-10).
·
Remove wheel chocks (TM 10-3930-669-10).
END OF TASK
11-29
|
