TM 10-3930-669-20 (6) Loosen nut (23) and unscrew rod (24). (7) Remove screw (16), washer (17), pin (18), and pivot (19) from cab frame (20). NOTE The  remaining  linkage  can  be  lifted from the forklift after performing Step (10).  It slides out of master cylinder with bellows attached. (8) Remove two bushings (21) from cab frame (20). (9) Remove two bearings (22) from pivot (19). (10)   Remove nut (25), washer (26), washer (27), and screw (28) from pivot (29) and rod end (30). (11)   Remove nut (31), washer (32), washer (33), and screw (34) from pivot (29) and rod end (35) of fitting and linkage (36). 11-21