TM 10-3930-669-20 (5)   Disconnect connector P18 (16) from oil pump connector (17). (6)   Remove noise filter (18) from oil pump connector (17) wires. WARNING Use care when removing springs.  Springs are under spring tension and can act as projectiles when released and could cause severe eye injury. (7) Disconnect spring (19) from bracket (20). (8) Remove three screws (21), washers (22), bracket (20), and oil pump assembly (23) from forklift (24). (9) Remove fittings (8 and 9) from tee fitting (25). (10)  Remove tee fitting (25) from oil pump assembly (23). (11)  Remove fitting (15) and elbow (12) from elbow (26). (12)  Remove elbow (26) from oil pump assembly (23). b.  Installation. (1) Install elbow (26) on oil pump assembly (23). (2) Install elbow (12) and fitting (15) on elbow (26). (3) Install tee fitting (25) on oil pump assembly (23). (4) Install fittings (8 and 9) on tee fitting (25). 10-9