| |
TM 10-3930-669-20
9-2. DRIVESHAFT REPLACEMENT/REPAIR (CONT).
e.
Installation.
(1)
Install driveshaft (9) on transmission flange
(10) with two clamps (8), four lock washers (7),
and four screws (6). Tighten screws to 18 lb-ft
(25 N·m).
(2)
Install driveshaft disk flange (4) on brake disc
(5) with four screws (3), lock washers (2), and
nuts (1). Tighten nuts to 18 lb-ft (25 N·m).
NOTE
Follow-on Maintenance:
•
Install drive axle oil pump (Para 10-3).
•
Remove wheel chocks
END OF TASK
9-6
|
