TM 10-3930-669-20 b. Disassembly. (1)   Slide   four   grease   seals   (11)   down   onto universal joint (12). (2)   Remove two clips (13) from driveshaft (9). Discard clips. CAUTION Be   careful   when   removing   bearing caps.    Needle  bearings  may  fall  out and be damaged or lost. (3) Remove four bearing caps (14) from driveshaft (9) and universal joint (12). (4) Remove   universal   joint   (12)   from   driveshaft (9). (5) Remove  four  grease  seals  (11)  from  universal joint (12).  Discard grease seals. (6) Slide     four     grease     seals     (15)     down     onto universal joint (16). (7) Remove four clips (17) from driveshaft (9) and driveshaft flange disk (4). (8) Remove four bearing caps (18) from driveshaft (9) and driveshaft flange disk (4). (9) Remove   driveshaft   (9)   from   universal   joint (16). (10)  Remove   universal   joint   (16)   from   driveshaft flange disk (4). (11)  Remove  four  grease  seals  (15)  from  universal joint (16). 9-3