TM 103930-669-20 9-2.  DRIVESHAFT REPLACEMENT/REPAIR. This task covers: a.  Removal c. Cleaning/Inspection e.   Installation b.  Disassembly d.  Assembly INITIAL SETUP Tools and Special Tools Tool Kit, General Mechanic's: Automotive (Item 1, Appendix B) Wrench, Torque (0-60 N·m) (Item 12, Appendix B) Materials/Parts Cloth, Lint-Free (Item 6, Appendix C) Grease, Bearing (Item 14, Appendix C) Rags, Wiping (Item 19, Appendix C) Materials/Parts - Continued Solvent, Dry-cleaning (Item 20, Appendix C) Clips (6) Washer, Lock (4) Washer, Lock (4) Equipment Condition Engine OFF (TM 10-3930-669-10) Wheels chocked (TM 10-3930-669-10) Drive axle oil pump removed (Para10-3) a.  Removal. NOTE For removal of driveshaft, elevate front of forklift. (1) Remove four nuts (1), lock washers (2), screws (3), and driveshaft disk flange (4) from brake disc (5).  Discard lock washers. (2) Remove  four  screws  (6),  lock  washers  (7),  two  clamps  (8),  and  driveshaft  (9)  from  transmission  flange  (10). Discard lock washers. 9-2