TM 10-3930-669-20 (3) Remove   nut   (9),   lock   washer(10),   washer   (11), and   three   cables   (8,   12,   and   13)   from   shunt terminal (14).  Discard lock washer. (4) Lift back terminal cover (14), loosen nut (15), and remove cable (16) from battery 15). (5) Remove    screw    (17),    washer    (18),    and    three cables (16, 19, and 20) from ground mount (21). e. Battery Cable Installation. (1) Install  three  cables  (20,  19,  and  16)  on  ground mount (21) with washer (18) and screw (17). 7-129