| |
TM 10-3930-669-20
7-41. ENGINE OIL TEMPERATURE SENSOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Item 1, Appendix B)
Materials / Parts
Cap and Plug Set (Item 5, Appendix B)
Rags, Wiping (Item 19, Appendix C)
Washer, Lock
Equipment Condition
Engine OFF (TM 10-3930-669-10)
Parking brake applied (TM 10-3930-669-1( )
Wheels chocked (TM 10-3930-669-10)
Cab door opened (TM 10-3930-669-10)
Engine access cover opened
(TM 10-3930-669-10)
a.
Removal.
WARNING
BURN HAZARD
Allow engine to cool before performing maintenance on the muffler, exhaust pipe, exhaust
manifold, or turbocharger. If necessary, use insulated pads and gloves.
(1)
Remove nut (1), lock washer (2), washer (3), and wire (4) from oil temperature sensor (5). Discard
lock washer.
(2)
Using a wiping rag, clean area around engine oil temperature sensor (5) and heater valve (6).
NOTE
Cap and plug engine oil temperature sensor and heater valve when removed.
(3)
Remove engine oil temperature sensor (5) from heater valve (6).
7-92
|