TM 10-3930-669-20 7-37.  DRIVE AXLE COOLING FANS REPLACEMENT/REPAIR (CONT). (2) Push     terminal     (4)     and     wires     (3)     through connector S17 (2). d.  Installation. CAUTION Ensure  fan  blades  do  not  hit  oil  cooler fins.  Damage to equipment may occur. NOTE Both fans are installed the same way. Top fan is shown. Both fans must be installed on the forklift together. (1) Install fan (4) on two brackets (5) with four nuts (3). (2) Connect   connector   S17   (2)   to   connector   P17 (1). Follow-on Maintenance: •  Verify air flow from engine ventilation panel. •  Install engine ventilation panel (Para 6-2). •  Remove wheel chocks (TM 10- 3930-669-10) END OF TASK 7-84