| |
TM 10-3930-669-20
b. Installation.
(1)
Install fuel shutoff solenoid (8) on fuel injection
pump (9) with two washers (12), lock washers
(11), and screws (10). Tighten screws to 7 lb-ft
(10 N.m).
(2)
Install fuel shutoff solenoid (8) brace on
injection pump (9) with lock washer (7) and
screw (6). Tighten screw to 7 lb-ft (10 N.m).
(3)
Install plunger (4) in fuel shutoff lever (5) with
retaining clip (3).
(4)
Connect solenoid connector (2) on connector
P10 (1).
NOTE
Follow-on Maintenance:
Close cab engine access cover
(TM 10-3930-669-10).
Close cab door (TM 10-3930-669-
10).
Remove wheel chocks (TM 10-
3930-669-10).
END OF TASK
7-81
|