TM 10-3930-669-20 NOTE Tag and mark all wires prior to removal. (2) Remove   four   screws   (5),   washers   (6),   three wires (7), and fuse panel (8) from cab wall (9). NOTE Record all components in each position of the fuse panel. (3) Remove   11   fuses   (10),   two   relays   (11),   and diodes (12) from fuse panel (8). NOTE One  connector  removal  and  installation is   shown.      All   other   connectors   are removed and installed the same way. (4) Using   connector   tool,   remove   26   connectors (13) from fuse panel (8). b.  Installation. (1) Using  connector  tool,  install  26  connectors  (13) in fuse panel (8). (2) Install two diodes (12), relays (11), and 11 fuses (10) on fuse panel (8). (3) Install  fuse  panel  (8)  on  cab  wall  (9)  with  three wires (7), four washers (6), and four screws (5). 7-75