| |
TM 10-3930-669-20
7-14. ENGINE SWITCH REPLACEMENT (CONT).
(3)
Remove nut (9) and engine switch (4)
from lower cover (6).
NOTE
Tag and mark all wires prior to removal.
(4)
Loosen screw (10) and remove wire (11)
from engine switch (4).
(5)
Loosen screw (12) and remove two wires
(13) from engine switch (4).
(6)
Loosen screw (14) and remove wire (15)
from engine switch (4).
b. Installation.
(1)
Install wire (15) on engine switch (4) and
tighten screw (14).
(2)
Install two wires (13) on engine switch (4)
and tighten screw (12).
(3)
Install wire (11) on engine switch (4) and
tighten screw (10).
(4)
Install engine switch (4) in lower cover (6)
with nut (9).
(5)
Install lower cover (6) on upper cover (7)
and steering column (8) with four screws
(5).
(6)
Install knob (3) on engine switch (4) with
lock washer (2) and screw (1).
NOTE
Follow-on Maintenance:
•
Close cab door (TM 10-3930-669-
10).
•
Connect batteries (Para 7-48).
•
Remove wheel chocks
(TM 10-3930-669-10).
END OF TASK
7-32
|
