TM 10-3930-669-20 NOTE All  glow  plugs  are  removed  the  same way.      Cylinder   No.      3   glow   plug   is shown. (3) Remove glow plug (6) from cylinder head (11). b.  Installation. (1) Install glow plug (6) in cylinder head (11). Tighten glow plug (6) to 65 lb-ft (88 N.m). (2) Position    four    washers    (10)    and    three connecting rails (9) on glow plugs (6). (3) Install  two  washers  (8)  and  nuts  (7)  on glow plugs (6). (4) Install  washer  (5),  two  wires  (4),  washer (3),  lock  washer  (2),  and  nut  (1)  on  glow plug (6). NOTE Follow-on Maintenance: • Install cab (Para 15-2). • Remove wheel chocks (TM 10-3930-669-10). END OF TASK 7-15