TM 10-3930-669-20 (3) Remove   three   screws   (10)   and   starter (11) from flange (12). (4) Remove three screws (13) and flange (12) from engine (14). b.  Installation. (1) Install   flange   (12)   on   engine   (14)   with three screws (13). (2) Install starter (11) on flange (12)with three screws (10). (3) Install wire (9) on starter solenoid (6) with lock washer (8) and nut (7). (4) Install   two   cables   (4   and   5)   on   starter solenoid (6) with two lock washers (3) and nuts (2).  Lift two covers (1). NOTE Follow-on Maintenance: • Install drive axle oil cooler assembly (Para 10-2). • Connect batteries (Para 7-48). • Remove wheel chocks (TM 10-3930-669-10). END OF TASK 7-13