TM 10-3930-669-20 7-6.  STARTER ASSEMBLY REPLACEMENT. This task covers: a.  Removal b.  Installation INITIAL SETUP Tools and Special Tools Tool Kit, General Mechanic's: Automotive (Item 1, Appendix B) Wrench, Torque (0 to 175 lb-ft [0-237 N.m]) (Item 2, Appendix B) Materials/Parts Tags, Identification (Item 21, Appendix C) Washer, Lock (3) Equipment Condition Engine OFF (TM 10-3930-669-10) Parking brake applied (TM 10-3930-669-10) Wheels chocked (TM 10-3930-669-10) Batteries disconnected (Para 7-48) Drive axle oil cooler assembly removed (Para 10-2) a.  Removal. NOTE Tag and mark all wires and cables prior to removal. (1) Lift  back  two  covers  (1)  and  remove  two  nuts  (2),  lock  washers  (3),  and  cables  (4  and  5)  from  starter solenoid (6).  Discard lock washers. (2) Remove nut (7), lock washer (8), and wire (9) from starter solenoid (6).  Discard lockwasher 7-12