TM 10-3930-669-20 7-2.  ALTERNATOR REPLACEMENT (CONT). (5) Remove nut (11), washer (12), and ground strap (13) from terminal (14). (6) Loosen nut (15) on screw (16). (7) Loosen screw (17). (8) Move   alternator   (18)   toward   engine   (19)   and remove belt (20) from pulley (21). (9) Remove  screw  (17),  and  lock  washer  (22),  and flat  washer  (23)  from  alternator  (18).    Discard lock washer. (10) Remove  nut  (15),  washer  (24),  screw  (16),  and alternator (18) from engine (19). (11) Place alternator (18) on clean work surface. (12) Remove   two   screws   (25),   washers   (26),   and voltage regulator (2) from alternator (18). b.  Installation. (1) Install  voltage  regulator  (2)  on  alternator  (18) with two washers (26) and screws (25). 7-4