TM 10-3930-669-20 6-5.  BLOWER BELT REPLACEMENT (CONT). b.  Installation. (1) Install   belt   (4)   up   through   slot   in   bottom   of blower (2) and on blower pulley (7). (2) Install belt (4) on crank pulley (6). CAUTION Make   sure   belt   is   not   twisted   on pulleys or damage to equipment will result. (3) Using prybar, push in on tensioner (3) and install belt (4) on tensioner pulley (5). (4) Install view hole cap (1) on blower (2). NOTE Follow-on Maintenance: · Install alternator belt (Para 7-4). · Connect batteries (Para 7-8). · Remove   wheel   chocks   (TM   10- 3930-669-10). END OF TASK 6-12