| |
TM 10-3930-669-20
6-5. BLOWER BELT REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive (Item 1,
Appendix B)
Materials/Parts
Belt, Blower
Equipment Condition
Engine OFF (TM 10-3930-669-10)
Parking brake applied (TM 10-3930-669-10)
Wheels chocked (TM 10-3930-669-10)
Batteries disconnected (Para 7-48)
Alternator belt removed (Para 7-4)
a. Removal.
WARNING
Allow engine to cool before performing maintenance. Severe injury to personnel may result.
(1)
Remove view hole cap (1) from blower (2).
(2)
Using prybar, push in on tensioner (3) and remove belt (4) from tensioner pulley (5).
(3)
Remove belt (4) from crank pulley (6).
(4)
Remove belt (4) from blower pulley (7) and pull through slot in bottom of blower (2).
6-11
|