| |
TM 10-3930-669-20
(3)
If damaged, remove screw (6), washer (7), and
bracket (8) from engine ventilation panel (4).
b. Installation.
(1)
If removed, install bracket (8) on engine
ventilation panel (4) with washer (7) and screw
(6).
CAUTION
Make
sure
gap
is
maintained
between engine ventilation panel and
engine. Failure to maintain proper
gap may result in vibration and
cause damage to equipment.
(2)
Position ventilation panel (4) on forklift (5) so
that 1/4 - 3/8 in. (6.35 9.53 mm) gap exists
between engine ventilation panel and engine.
(3)
Install plate (3), three washers (2), and nuts (1)
on engine ventilation panel (4).
NOTE
Follow-on Maintenance:
·
Right-hand engine access cover
closed (TM 10-3930-660-10).
·
Right-hand
ventilation
panel
installed (Para 6-3).
·
Remove wheel chocks (TM 10-
3930-669-10).
END OF TASK
6-3
|
